b. In reminding state, if the clock was set, press "
" button to see the current
time.
5. Child lock Function
To Lock : press " "and " " simultaneously for 3 seconds, there will be a long
"beeping "sound and the "
" will be illuminated.
Lock quitting : press "
"and " " simultaneously for 3 seconds, there will be a long
"beeping " sound indicating the child-lock is released.
NOTE: During working state, if you want to stop cooking, press stop button quickly.
Do not need to long pressing on stop button, it is invalid.
6. Reminder Function
This function will help to remind you to start cooking in a certain time from 0∶01 to
9∶59. Only when oven in standby state, the reminder can be set. Follow below to
set the reminder:
a. Press reminder setting button "
";
b. Rotate "K2 " to set the hour time of reminder. (Time should be within 0--9).
c. Press reminder setting button "
" again;
d. Rotate "K2 " to set minute time of reminder. (Time should be within 0--59).
e. Press "
" to confirm setting. The time will count down.
NOTE: The oven buzzer will sound for 10 times after the time back to the zero hour.
You can cancel the reminder during setting by pressing the stop button;
After the reminder has been set, you can cancel it by pressing stop button
twice.
7. Start/Pause/Cancel Function
a. If the cooking time has been set, press " " to start cooking. If the cooking is
paused, press "
" to resume cooking.
b. During cooking process, press "
" once to pause the cooking. Press " "twice
to cancel the cooking.
8. Energy-Saving Function
a. In waiting state and reminding state, press " " for three seconds, the LED
display will go off and set to energy-saving mode.
b. If no operation in 10 minutes under waiting state, the LED display will go off
and go into energy-saving mode.
c. Under the energy-saving mode, press any key or rotate any knob can quit the
energy-saving mode.
9. Pyrolytic Function
This function allows you to clean thoroughly the oven cavity.
a. Rotate "K1 " to select the pyrolytic function. LED will display "PyR ".
b. Press "
" to confirm the cooking. And the default time is 2 hours, "PyR "will
display on the LED.
c. Rotate "K1 " to change the pyrolytic time. The timer can be set 1∶30 or 2∶00
hours.
To Next Page
Loading...
Need help?
General
