COLDEST AREA OF REFRIGERATOR
The symbol below against shows the location of
the coldest area of the refrigerator, this area is
bounded below by the glass crisper and top with
the symbol or the shelf positioned at the same
height.
To ensure the temperatures in this area, do not change the position of the
shelf. In forced air coolers (with a fan or No Frost models), the symbol of
the coldest zone is not shown because the temperature inside them is
homogeneous.
To help you fine tune your refrigerator, it is equipped with a temperature
gauge that will control the average temperature in the coldest zone.
ATTENTION: This indicator is designed to operate only with your
refrigerator, do not use another refrigerator (indeed, the coldest zone is not
the same), or for any other use.
With the temperature indicator you can regularly check that the temperature
of the coldest zone is correct. In fact, the temperature inside the refrigerator
depends on several factors such as ambient room temperature, the amount
of stored products, the frequency of opening the door. Take these factors
into consideration when the machine setting.
When the indicator says "OK", it means that your thermostat is set, and the
internal temperature is correct.
If the color of the indicator is white, it means that the temperature is too
high, it is necessary in this case increase the thermostat setting and wait 12
hours to carry out a new visual check of the indicator.
After loading or door opening, it is possible that the indicator turns white
after a few moments.
INSTALLATION OF TEMPERATURE INDICATOR
CHECKING THE TEMPERATURE IN THE AREA MORE COLD
OK
40
To Next Page
Loading...
