Dis-assemble the knob Water inlet
Screw down the knob press the key with cup
43
1.Screw up the knob according to the "OPEN" arrow direction prompted on the knob of the
water dispenser.
2.Introduce drinking water from inlet. It is suggested not to exceed the scale line at top of the
water tank at the most.
3.Screw down the knob according to the "CLOSE" direction prompted on the knob, and close
the door.
4.Use a cup to press against the water outlet key, and make water flow out along water nozzle
into the cup. After the cup is taken away, the water flow will stop naturally.
Note: If drinking function is left unused for a long term, please clean up the water tank.
WASTER DISPENSER
To Next Page
Loading...
Need help?
General
