When you have finished cooking
1. Touch the heating zone selection that you
wish to switch off.
2. Turn the cooking zone off by touching the
‘slider’ control. Make sure the display shows
‘0’.
3. Turn the whole cooktop off by touching the
ON/OFF control.
4. Beware of hot surface
‘H’ will show which means cooking zone is
too hot to touch. It will disappear when the
surface has cooled down to a safe
temperature. It can also be used as an
energy saving function if you want to heat
further pans, use the hotplate that is still hot.
Using Boost Function
- Activate the boost function
1. Select the zone with boost function.
2. Touching the ‘boost’ key, then the display
shows ‘b’.
EN-13
To Next Page
Loading...
