Using the timer to switch off one or more cooking zones
1. Touching the heating zone selection control that you
want to set the timer for.
2. Touch timer control, the ‘10’ will show in the timer
display, and the ‘0’ flashes.
3. Set the time by touching the ‘slider’ control.
4. Touch timer control again, the ‘1’ will flash.
5. Set the time by touching the ‘slider’ control.
6. When the time is set, it will begin to count down
immediately. The display will show the remaining time.
NOTE: there will be a red dot in the right bottom corner
of power level indication which indicating that zone is
selected.
7. When cooking timer expires, the corresponding
cooking zone will be switched off automatically.
NOTE: other cooking zones will keep operating if they
are turned on previously.
If the timer is set on more than one zone
Cancelling the timer
1. Touching the heating zone selection control that you want
to cancel the timer.
2. Touching the timer control, the indicator will flash.
3. Touch the ‘-’ to set the timer to ‘00’, the timer is
cancelled.
EN-16
To Next Page
Loading...
