SIGNIFY EA0403 - Page 20

AFTER SALES SUPPORT
1300 777 137
service@unclebills.com.au
MODEL: EA0403 PRODUCT CODE: 46486 08/2017
20
To Decrease the Volume
Press the VOL- button on the control panel or the remote control (No. 5 on the control
panel diagram and No. 4 on the remote control diagram) repeatedly, or press and hold
down until the desired volume is reached.
To Access the Next Folder
Press and hold the F+10 button on the control panel or the FOLDER+ button on the
remote control (No. 11 on the control panel diagram and No. 16 on the remote control
diagram) for 2 seconds. The Jukebox will then skip to the start of the next folder. If the
Jukebox is in random (“RAN”) mode the folder skipping function will be disabled.
To Access Previous Folder
Press and hold the F-10 button on the control panel or the FOLDER- button on the
remote control (No. 17 on the control panel diagram and No. 8 on the remote control
diagram) for 2 seconds. The Jukebox will then skip to the start of the previous folder. If the
Jukebox is in random (“RAN”) mode the folder skipping function will be disabled.
To Repeat One/All Tracks or Select Random
Firstly, ensure that a track is playing. Then press the RPT button on the control panel or
the REPEAT button on the remote control (No. 9 on the control panel diagram and No. 7
on the remote control diagram).
• To repeat ONE track press the RPT or REPEAT button once (when there is no repeat
function selected). The repeat symbol will then ash on the top left of the LCD display.
• For use when playing a burnt CD, USB ash drive or SD card with multiple folders: To
repeat ALL tracks in one folder press the RPT or REPEAT button twice (when there is
no repeat function selected). The repeat symbol will be displayed solid on the top left
of the LCD display. The word “FOLDER” will also be displayed on the bottom right of
the CD display. After the last track in the current folder being played is nished, the
Jukebox will start back at Track 1.
• To set the play function to RANDOM press the RPT or REPEAT button four times
(when there is no repeat function selected). The letters “RAN” will be displayed on the
bottom left of the LCD display.
• To disable any repeat or random selection press the RPT or REPEAT button until the
repeat symbol or “RAN” is no longer displayed on the LCD display.
Instructions (cont)