SIGNIFY EA0403 - Page 24

AFTER SALES SUPPORT
1300 777 137
service@unclebills.com.au
MODEL: EA0403 PRODUCT CODE: 46486 08/2017
24
To Increase the Volume
Press the VOL+ button on the control panel or the remote control (No. 4 on the control
panel diagram and No. 14 on the remote control diagram) repeatedly, or press and hold
down until the desired volume is reached.
To Decrease the Volume
Press the VOL- button on the control panel or the remote control (No. 5 on the control
panel diagram and No. 4 on the remote control diagram) repeatedly, or press and hold
down until the desired volume is reached.
To Repeat One/All Tracks or Select Random
Firstly, ensure that a track is playing. Then press the RPT button on the control panel or
the REPEAT button on the remote control (No. 9 on the control panel diagram and No. 7
on the remote control diagram).
• To repeat ONE track press the RPT or REPEAT button once (when there is no repeat
function selected). The repeat symbol will then ash on the top left of the LCD display.
• For use when playing a burnt CD, USB ash drive or SD card with multiple folders: To
repeat ALL tracks in one folder press the RPT or REPEAT button twice (when there is
no repeat function selected). The repeat symbol will be displayed solid on the top left
of the LCD display. The word “FOLDER” will also be displayed on the bottom right of
the CD display. After the last track in the current folder being played is nished, the
Jukebox will start back at Track 1.
• To set the play function to RANDOM press the RPT or REPEAT button four times
(when there is no repeat function selected). The letters “RAN” will be displayed on the
bottom left of the LCD display.
• To disable any repeat or random selection press the RPT or REPEAT button until the
repeat symbol or “RAN” is no longer displayed on the LCD display.
Programming Tracks to Play
The Jukebox will allow the user to create a “playlist” from the MP3 les that are loaded on
to the USB drive. It will allow up to 99 tracks to be selected and played in order of P01 –
P99. This is particularly handy if the USB drive has many tracks loaded, but only specic
tracks need to be played (up to 99 tracks).
To program the tracks, rst press the STOP button (No. 8 on the control panel diagram
and No. 3 on the remote control diagram) to stop all tracks from playing. Press the PROG
Instructions (cont)