service@unclebills.com.au
MODEL: ET0195 PRODUCT CODE: 55913 12/2016
22
AFTER SALES SUPPORT
1300 777 137
Advanced Operations
Menu Function Summary
• As listed above, there are many menu functions to choose from. Press the menu (M) button
repeatedly to select the individual menus.
• Use the up (
) and down ( ) buttons to change the selections in the menu.
• Press menu (M) button seven times to navigate through the menu. Press the PTT button once to save
your selection.
CTCSS/DCS (Sub-channel) Setting
This Radio is equipped with 75 main channels and also 99 sub-channels (CTCSS and DCS). If there are
many PMR users in your neighbourhood, there is a chance that some of these users are operating on the
same radio channel. To prevent receiving signals from other users, sub-channels have been included.
Two Radios will only be able to communicate with each other when they are operating on the same radio
channel and when they have selected exactly the same sub-channel CTCSS/DCS code. This allows you to
MENU BUTTON LCD DISPLAY FUNCTION SETTING
Press 1 Time Channel Number Flashing Channel Setting
Press 2 Times CTCSS/DCS Number Flashing CTCSS/DCS Setting
Press 3 Times “OF” Flashing VOX Setting
Press 4 Times “CA” Flashing Call Tone Setting
Press 5 Times “tO” Flashing Key Tone Setting
Press 6 Times “rO” Flashing Roger Beep Tone Setting
Press 7 Times “rP” Flashing Repeater Function Setting
Note: If you make no entry in the menu for about 6 seconds, the menu will close.
To Next Page
Loading...