05
AFTER SALES SUPPORT
1300 777 137
service@unclebills.com.au
MODEL: EA0944 PRODUCT CODE: 59080 12/2017
General Information and Safety Instructions
RETAIN FOR FUTURE USE
Read this manual thoroughly before rst use, even if you are familiar with this type of product. The
safety precautions enclosed herein reduce the risk of re, electric shock and injury when correctly
adhered to. Please keep this user manual in a safe place along with your purchase receipt and carton
for future reference. If applicable, pass these instructions on to the next owner of the product. Always
follow basic safety precautions and accident prevention measures when using an electrical product.
This lightning ash with arrowhead symbol within an equilateral triangle is intended to alert
the user to the presence of uninsulated dangerous voltage within the product’s enclosure
that may be of sufcient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the product.
1. Before using the Smart DJ Speaker, ensure the electrical voltage and circuit frequency
correspond to the voltage stated on the rating label of your product and your power outlet is
properly earthed.
2. Do not use the Smart DJ Speaker with an extension cord unless this cord has been checked and
tested by a qualied electrician. If an extension cord is used, please ensure that it has a rating
equal or exceeding the rating of this product.
3. Do not pull or carry by the cord, use the cord as a handle, close a door on the cord, or pull the
cord around sharp edges or corners. Check the power cord regularly for visible damage. If it is
damaged, please contact the After Sales Support Line for further advice.
4. Only use the AC power cord provided with the Smart DJ Speaker. Check the power cord regularly
for visible damage. If it is damaged, please contact the After Sales Support Line for further
advice.
5. When the Smart DJ Speaker is not in use, switch it off and unplug from the power outlet. To
unplug, grip the adaptor and pull from the power outlet. Never pull by the cord.
6. The power adaptor is not user-serviceable. Contact with high voltage components may cause a
risk of electric shock, therefore do not attempt to open the back cover of the Smart DJ Speaker.
This will void the warranty.
7. The installation of a residual current device (safety switch) is recommended to provide additional
safety protection when using electrical devices. It is advisable that a safety switch with a rated
residual operating current not exceeding 30mA be installed in the electrical circuit supplying the
device. See your qualied electrician for professional advice.
WARNING: To reduce the risk of electric shock do not remove cover (or back). No user-
serviceable parts inside. Refer servicing to qualied service personnel.
To Next Page