SIGURO SGR-TD-H911W - User Manual

Questions and Answers

N
Nichole RayAug 18, 2025
Why is the drying process taking so long in my SIGURO Dryer?
- J
  Jesus EvansAug 18, 2025
  If the drying process of your SIGURO Dryer is taking longer than usual, several factors could be at play. The lint filter might be clogged; try washing it with lukewarm water. The heat exchanger could be blocked, so cleaning it might help. Make sure the ventilation grilles are open to prevent the room temperature from rising too much. A layer of scale may have formed on the humidity sensor, requiring cleaning. Avoid overloading the dryer with laundry. Finally, ensure your laundry is sufficiently wrung out by selecting a higher wringing speed on your washing machine.
A
Amber DixonAug 20, 2025
What to do if laundry is damp after drying in SIGURO Dryer?
- S
  Stephanie RoseAug 20, 2025
  If your laundry is coming out damp from your SIGURO Dryer, it could be due to a few reasons. Hot laundry can sometimes feel wetter right after drying. The program you're using might not be right for the type of laundry; check the labels and select an appropriate program, or use time programs. A clogged lint filter or blocked heat exchanger can also cause this, so try washing the filter with lukewarm water and cleaning the heat exchanger. Avoid overloading the dryer. Also, ensure your laundry is properly wrung out by selecting a higher wringing speed on your washing machine.
K
Kyle PorterAug 23, 2025
Why does the heat exchanger warning light turn on in my SIGURO Dryer?
- K
  Kyle JacksonAug 23, 2025
  If the warning symbol lights up on your SIGURO Dryer to indicate the need to clean the heat exchanger, it could be due to a bent drain hose if the appliance is connected directly to the drain; check the drain hose. Alternatively, the heat exchanger might be dirty, so try cleaning it.
M
Megan WrightAug 26, 2025
What to do if the SIGURO Dryer program was interrupted?
- K
  Kyle MclaughlinAug 26, 2025
  If the programme on your SIGURO Dryer was interrupted, make sure that the loading door is properly closed. If the power supply has been interrupted, press the Start/Pause button to restart the program. Also, make sure the water tank is not full by pouring out the water tank.
A
Alexandra RichmondAug 28, 2025
How to unlock and start SIGURO SGR-TD-H911W?
- D
  deborahriveraAug 28, 2025
  If your SIGURO Dryer cannot be opened or the program won't start, first, ensure the dryer is properly plugged into the mains. Check that the loading door is fully closed. Verify that you have set the program and haven't accidentally paused the dryer. Also, check if the child lock is activated and, if so, deactivate it.
H
Heidi CostaAug 30, 2025
Why is the water tank symbol flashing on my SIGURO SGR-TD-H911W?
- P
  Patrick MccoyAug 31, 2025
  If the water tank warning symbol lights or flashes on your SIGURO Dryer, it likely means the water tank is full. Empty the water tank.
M
Morgan JohnstonSep 2, 2025
What does it mean when the filter light is on in my SIGURO SGR-TD-H911W Dryer?
- T
  Timothy PerezSep 2, 2025
  If the warning symbol lights up on your SIGURO Dryer to indicate that the filter needs cleaning, it could be that the lint filter is clogged, so you should clean it. Additionally, the filter seat may be clogged with fibres, so clean the filter seat as well. A layer of fibres may have formed on the surface of the filter, causing clogging, so wash the filter with lukewarm water.
G
Gregory HendersonSep 4, 2025
Why is the filter and heat exchanger light flashing on my SIGURO SGR-TD-H911W?
- G
  George ScottSep 4, 2025
  If the warning symbol flashes on your SIGURO Dryer to indicate that the filter and heat exchanger need to be cleaned, the filter seat may be clogged with fibres, so clean the filter seat. A layer of fibres may have formed on the surface of the filter, which causes clogging, so wash the filter with lukewarm water. The heat exchanger may also be blocked, so clean the heat exchanger.
L
lamdennisSep 7, 2025
Why is water leaking from the SIGURO SGR-TD-H911W door?
- R
  richardmortonSep 7, 2025
  If water is leaking from the laundry door of your SIGURO Dryer, it's possible that fibres have accumulated on the inner surface of the laundry door and on the seal. Clean the inside surface of the loading door and the surface of the loading seal.
M
Matthew RogersSep 9, 2025
Why does the SIGURO SGR-TD-H911W door open by itself?
- N
  Nathan GraySep 9, 2025
  If the laundry door of your SIGURO Dryer opens by itself, it might not be closed properly. Push the loading door to close it with an audible click.