Do you have a question about the SIIG CE-DP0511-S1 and is the answer not in the manual?
Details the ports and indicators on the Transmitter unit, including power, link status, and video/audio connections.
Details the ports and indicators on the Receiver/Repeater unit, including power, link status, and video/audio connections.
Connect DisplayPort source to TX DP IN and local display to TX DP OUT.
Connect remote display to RX DP OUT, IR/RS-232 cables, and CAT5/6 network cable.
Details on cascading receivers and connecting audio output ports.
Instructions for plugging in power adapters and powering on the device.
Illustrates the fundamental setup for extending DisplayPort signals between a source and a display.
Demonstrates how to connect multiple receivers in a daisy-chain configuration for extended displays.
Shows how to link multiple receivers in a cascade setup for extensive signal distribution.
Explains how to use a Gigabit Ethernet switch for signal distribution, especially with units having single ports.