SIIG CE-H24011-S1 User Manual (English)

Questions and Answers:

A
Andrea WarnerAug 10, 2025
What to do if color is losing or there is no video signal output in HDMI display with SIIG Cables and connectors?
- K
  Kristina MoralesAug 11, 2025
  If you are experiencing color loss or no video signal output on your HDMI display with SIIG Cables and connectors, the connecting cables may not be connected correctly, or they may be damaged. Ensure that the cables are correctly connected and in good working condition. Also, verify that the resolution of your display is compatible with the current output resolution.
J
Jonathan HarrisAug 19, 2025
What to do if there is no HDMI signal output in splitter while local HDMI input is in normal working state with SIIG Cables and connectors?
- S
  Stephanie BellAug 19, 2025
  If there's no HDMI signal output in the splitter while the local HDMI input is working correctly with SIIG Cables and connectors, the connecting cables might be incorrectly connected or damaged. Verify that the cables are properly connected and in good working order.
H
Heather PetersonAug 26, 2025
Why do I see a splash screen in output devices with SIIG Cables and connectors?
- O
  omartinezAug 26, 2025
  If you are seeing a splash screen on your output devices with SIIG Cables and connectors, it could be due to the poor quality of the connecting cable. Try using a different cable of good quality.
D
Donna MorrisonSep 2, 2025
What to do if static becomes stronger when connecting the video connectors with SIIG Cables and connectors?
- M
  michael84Sep 2, 2025
  If static becomes stronger when connecting the video connectors with SIIG Cables and connectors, this may be due to bad grounding. Check the grounding and ensure it is well connected.