6
Windows Vista (32-/64-bit) / Server 2008
(32-/64-bit)
1. Install the board and boot up Windows.
2. At the Found New Hardware window,
click Locate and install driver software
(recommended), click Continue. For Server
2008, skip this step.
3. Insert the driver CD. Close the CD autoplay
window if prompted.
4. Click Don't search online. (Skip this step if
not prompted)
5. Click I don't have the disc, show me other
options.
6. Click Browse my computer for driver
software (advanced).
7. Type D:, then click Next. (Change D: to
match your CD/DVD-ROM driver letter)
8. At The software for this device has been
successfully installed, click Close.
9. Repeat steps 4-8 to complete the installation.
10. Restart Windows to complete the
installation.
To Next Page
Loading...
