EasyManuals Logo

SIIG TV Mount User Manual

SIIG TV Mount
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
A
BCDEFG
1
2
3
4
04-0525A
(x4) bolt
(x4) concrete
anchor
(x4) small
washer
(x4) large
washer
(x4) M4X12
screw
(x4) M5X12
screw
(x4) M6X12 screw
Fixed LCD TV/Monitor Mount - 10" to 24"
Attach the wall plate to the wall again and insert the bolts (A) and large washers
(D) into the holes (figure 1-b) and tighten.
Wood Stud Installation
Step 1: Wall Plate Installation
Installation Instructions
Use a high-quality electronic stud finder (commercially available) to locate dead
center of two studs and mark their locations with a pencil (figure 1-a).
Hold the wall plate to the wall and mark four locations to be used for mounting the
wall plate.
Take down the plate and drill four holes at the position you've marked.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SIIG TV Mount and is the answer not in the manual?

SIIG TV Mount Specifications

General IconGeneral
BrandSIIG
ModelTV Mount
CategoryTV Mount
LanguageEnglish

Related product manuals