VKX / VKL Disassembly and disposal
Technical changes reserved - 21 -
8 Disassembly and disposal
CAUTION! Risk of injury!
Never remove a flow switch or its body from a system under pressure.
Make sure that the plant is shut down professionally.
Before disassembly:
Prior to disassembly, ensure that
the equipment is switched off and is in a safe and de-energised state.
the equipment is depressurised and has cooled down.
Disassembly:
Remove the electrical connectors.
Remove the flow switch using suitable tools.
Disposal:
Compliant with the Directives 2011/65/EU (RoHS) and 2012/19/EU (WEEE)*, the device
must be disposed of separately as electrical and electronic waste.
NO HOUSEHOLD WASTE!
The flow switch consists of various different materials ( § 9.1). It must not be disposed
of with household waste.
Take the flow switch to your local recycling plant
or
send the flow switch back to your supplier or to SIKA.
* WEEE reg. no.: DE 25976360
To Next Page
Loading...
