PAG12 UPKEEP AND MAINTENANCE
4. Replace the sealing ring every year or at least every two years.
It will need to be replaced early whenever the following occur:
- Cracks or dents
- Deformations;
- Dark appearance;
- Lack of flexibility.
Any of the aforementioned irregularities may prevent the correct sealing or closure of the pressure
cooker.
5. Periodically check the tightness of the pressure cooker long handle screws, using a screwdriver
and turning it clockwise until it can no longer turn.
To place a new sealing ring:
- Select a Silampos sealing ring identified
in the table (pag.03)
- Place the ring on the inner edge of the lid,
checking that it is adjusted and properly
placed.
To Next Page
Loading...