Silent Sentinel Osiris - Page 6

Osiris-Jaegar – Installer Guide
Camera 1 options
Osiris Open Platform
Version n.nnn (xxxx) xx
SN: FFFFFFFF POST: 000000000
Show Camera Menu
Camera Menu T/O 30
Exit menu
Options displayed in the Camera 1 options will vary between
configurations and are specific to the chosen payload that is
installed. This menu provides access to the supported
functionality and settings of the camera – (Ref Appendix 5).
Example values shown.
Show Camera Menu – Activates the video module on-screen settings menu.
The module's menu can be navigated using the Joystick Up/Down and Right/Left (Pan/Tilt)controls.
The Menu window closes when the OSD is exited.
Camera Menu T/O – Menu Time Out – Automatically closes the camera module menu if user stops
interacting with it. Time value is in Seconds (5 - 60).
Camera 2 options
Osiris Open Platform
Version n.nnn (xxxx) xx
SN: FFFFFFFF POST: 000000000
Zoom Mag Level X1
ICE Toggle On
ICE Level 3
ICE Version New
Exit menu
This menu is only available when a second, supported camera is
installed.
Thermal Imaging Camera Variant.
Zoom Mag Level – Enables digital enlargment of the Thermal image – x1 to x4 enlargement.
ICE Toggle – Turns On/Off the Integrated Contrast Enhancement function. (Ref. Appendix 1.)
ICE Level – Sets the amount of ICE applied when the toggle is On (0 - 7). (Ref. Appendix 1.)
ICE Version – Sets Module interface type – Do Not Change - For Factory use only.
Silent Sentinel SilSen DN145003 - 1.2b (Fork)
6