Silex technology BR-310AC

Questions and Answers

J
Jeremy JacksonAug 1, 2025
What to do if a LAN port error occurs on Silex technology BR-310AC Gateway?
- B
  Brian ArmstrongAug 1, 2025
  If you're experiencing a LAN port error with your Silex technology Gateway (POWER LED blinking rapidly, WLAN LED off, STATUS LED on), it could be due to the bridge feature being aborted because a non-wireless device was unplugged and changed on the LAN port. To resolve this, restart the Gateway. Note that this issue occurs in Single Client Mode. Alternatively, the problem could arise from connecting multiple devices via a HUB in Single Client Mode. In this case, connect only one device to the LAN port or switch to Multi-Client Mode.
L
Lauren FarmerAug 6, 2025
Why is my Access Point not displayed on Silex technology Gateway?
- M
  Melanie McdanielAug 6, 2025
  If your Access Point isn't showing up in the Wireless Network List on the Silex technology Gateway's web configuration interface, first ensure that the Access Point is active and operating correctly. If it is operating in a stealth mode, configure the detailed settings of the wireless network at Detailed Configuration of the Web configuration interface to connect to the Access Point. Also, the Gateway can display up to 32 wireless devices. If there are too many, use the SSID Filter to narrow down the displayed networks. Even if it's not displayed, you can still connect by configuring the wireless settings in the Detailed Configuration.
M
Melanie LeeAug 11, 2025
How to fix access issues to non-wireless device connected to Silex technology Gateway?
- E
  ebradshawAug 11, 2025
  If you cannot access a non-wireless device connected to the LAN port of your Silex technology Gateway, first check the LED status on the Gateway and ensure the non-wireless device is powered on. Also, verify that the connection isn't restricted by MAC address filtering in the Network Device Address settings.
C
Christina Young PhDAug 16, 2025
What to do if I fail to connect to a wireless network using Smart Wireless Setup on Silex technology BR-310AC Gateway?
- A
  Adriana CampbellAug 16, 2025
  If you're unable to connect to a wireless network using Smart Wireless Setup on your Silex technology Gateway, the WPS feature may be disabled on the Access Point. Check that the Access Point supports WPS and manually enable it if necessary. Additionally, the SSID Filter may be enabled on the Gateway; disable it in the Detailed Configuration of the web interface, as Smart Wireless Setup won't work with the SSID Filter enabled.
L
Lee WeberAug 22, 2025
Why does the connection to the non-wireless device keep getting lost on Silex technology BR-310AC Gateway?
- J
  Janet BaldwinAug 22, 2025
  If the connection to your non-wireless device is lost when using a Silex technology Gateway, it might be due to a timeout. The Gateway automatically cuts the link if the device is idle for 5 minutes. To restore the connection, initiate communication from the non-wireless device. To prevent future timeouts, disable sleep mode on the non-wireless device.
K
Kathryn SmithAug 27, 2025
How to delete an imported IEEE802.1X certificate on Silex technology BR-310AC Gateway?
- O
  ofernandezAug 27, 2025
  To delete an imported IEEE802.1X certificate on the Silex technology Gateway, you need to initialize the Gateway. Note that the certificate is only validated when it is in use and does not impact the authentication process if kept without being used with a compatible authentication method.

Summary

Introduction

1-1. Introduction

Provides an overview of the user manual and its purpose.

Disclaimers

Legal notices regarding content accuracy, changes, and liability.

Trademarks

Lists registered trademarks of various companies and technologies.

1-2. Safety Instructions

Details crucial safety precautions for using the BR-310AC.

1-3. User Registration and Customer Services

Information on registering the product and accessing support.

About BR-310 AC

2-1. Features

Highlights the key functionalities and advantages of the BR-310AC.

2-2. Parts and Functions

Describes the physical components and their respective purposes.

2-3. Hardware Specification

Outlines the technical specifications of the device's hardware.

2-4. Software Specification

Details the software protocols and configurations supported by the BR-310AC.

2-5. Use of Radio Waves

Provides guidance on potential interference and proper usage of radio frequencies.

2-6. Notes on Security

Discusses security considerations and potential risks associated with wireless communication.

2-7. OpenSSL License

Presents the terms and conditions of the OpenSSL license used in the product.

Before You Begin

3-1. Operating Mode

Explains the two available operating modes: Single Client and Multi-Client.

3-2. Configuration Method

Describes the different ways to configure the BR-310AC device.

3-3. Necessary Wireless Setting Information

Lists essential wireless network details required for configuration.

How to Configure BR-310 AC

Configuration using Configuration Mode

Step-by-step guide to setting up the device via a wired connection.

Configuration using Smart Wireless Setup (Push Switch)

Instructions for configuring the device using the WPS push button.

Configuration using Smart Wireless Setup (PIN code)

Guide for setting up the device using the WPS PIN code method.

List of Functions

5-1. How to Access Web Configuration Interface

Details on launching and using the device's web-based configuration tool.

5-2. IEEE802.1 X Authentication

Explains how to implement IEEE802.1X security for network access.

5-3. Saving Log

Instructions on how to save system logs for monitoring and troubleshooting.

Retrieving Event Log

Guide on accessing and viewing event logs for network activity.

5-4. Maintenance

Procedures for common maintenance tasks like restarting and factory resets.

Appendix

A-1. List of All Settings

Comprehensive list of all configurable parameters for the BR-310AC.

A-2. Troubleshooting

Solutions for common issues and problems encountered during setup or operation.