Getting Started with Silhouette Curio™
1
2
3
2
2
Install the Silhouette Studio
‰
Software
PC Installation
1. Insert the included Silhouette Studio® CD into the CD drive of your computer.
2. Proceed through the installation process by following the on-screen prompts. If the installation window
does not automatically appear, browse to the CD drive in My Computer and double-click the setup.exe
program to run it.
3. If a “New Hardware Found” dialog box appears, follow the recommended instructions to accept your
system’s installation of the Silhouette driver.
Mac® Installation
1. Insert the included Silhouette Studio® CD into the CD drive of your computer.
2. Drag and drop the Silhouette Studio® application icon into the applications folder to install Silhouette
Studio®.
Connect the Silhouette Curio™
Once the Silhouette Studio® software is installed, connect the Silhouette Curio™ to the power supply.
Then connect the Silhouette to your computer with the included USB cable as shown in the diagram.
Turn the machine on by pressing the power button. If your PC displays a “New Hardware Found” dialog
box, follow the recommended instructions to accept your system’s installation of the Silhouette driver.
power
To Next Page
Loading...