Why is there condensation on my Silhouette Kitchen Appliance cabinet or door?
Condensation on the cabinet or door of your Silhouette Kitchen Appliance can occur if the door is not shut properly or is opened too often. High ambient temperature or humidity can also contribute to this issue.
What does it mean when my Silhouette Kitchen Appliance alarm sounds and shows “LO” or “CL”?
If the alarm is sounding and “LO” or “CL” is displayed on your Silhouette Kitchen Appliance, it could be due to an excessively low ambient temperature or a sensor failure. It could also mean that the evaporator temperature is too low.
What to do if alarm beeping and “HI” is displayed on Silhouette DWC140D1BSSPR Wine Cooler?
If the alarm is beeping and 'HI' is displayed on the Silhouette Wine Cooler's control panel, it could be due to several reasons. You might have recently added too many warm bottles or cans to the cabinet, or the door might not be closed tightly. In this case, limit the quantity of warm items you're introducing to the cabinet and ensure the door is closed tightly. Alternatively, there may be a system leak, evaporator fan failure, or compressor fan failure. If the problem persists, contact a service center. To stop the beeping temporarily, unplug the unit and remove the wine.
Why is the temperature too high in my Silhouette DWC140D1BSSPR?
If your Silhouette Wine Cooler's cabinet temperature is too high, verify the temperature control setting and adjust if necessary. Ensure that the door is fully closed and that the gasket is sealing against the cabinet, and only open the doors as needed for short periods. Also, check that nothing is blocking the front-mounted exhausting vent. If you've recently added a large quantity of warm beverages, limit the quantity in the cabinet at the same time and stagger the load introduction if possible.
Why is there condensation on my Silhouette Wine Cooler?
Condensation on the cabinet and/or doors of your Silhouette Wine Cooler is often due to high humidity conditions in your home. The condensation will usually subside once humidity conditions return to normal. Also, ensure that the door is fully closed and that the gasket is sealing against the cabinet. Avoid opening the door too often or for extended periods.
How to fix a Silhouette DWC140D1BSSPR with no power?
If your Silhouette Wine Cooler has no power, a fuse in your home may be blown, or the circuit breaker tripped. Replace the fuse or reset the circuit breaker. It's also possible that there was a power surge, in which case you should unplug the wine cooler, wait a few seconds, and then plug it back in. Ensure the 3-prong plug is fully inserted into the outlet.
General| Type | built-in |
|---|---|
| Size | full-size |
| Color | stainless steel, silver |
| Total Capacity | 14 cubic feet |
| Bottle Capacity | 129 |
| Minimum Wine Cooler Temperature | 39 degrees fahrenheit |
| Maximum Wine Cooler Temperature | 64 degrees fahrenheit |
| Defrost System | yes |
| Number of Shelves | 12 |
| Number of Temperature Zones | 2 |
| Temperature Control | electronic |
| Interior Light | yes |
| Child Lock | no |
| Smart Home | no |
| Current | 20 amperes |
Weight and Dimensions| Depth | 28.5 inches |
|---|---|
| Height | 69.3 inches |
| Width | 23.4 inches |
| Cutout Depth | 28.7 inches |
| Cutout Height | 69.5 inches |
| Cutout Width | 23.7 inches |
| Net Weight | 251.3 pounds |
To Next Page
