japa 315+ User manual
Translation 3 315+ 2.0 - 2020
• Check the operation of the safety equipment. Do not use the machine if part of the mechanism is not
functioning properly.
• The machine may only be transported in the transport position. This is the responsibility of the driver.
Working area:
• Select a level and solid working area.
• Keep the area clean and free of obstructions.
• Ensure that the ground or floor is not slippery near the machine.
• Do not use the machine indoors, as the dust will enter your airways or cause a fire hazard.
• Use the machine only with sufficient lighting: daylight is recommended.
• Place the machine in the working position and always check the safety devices before starting the
machine.
During operation:
• Take extreme care when cutting knotty or twisted wood.
• When sawing incorrectly, the log may spin, causing risk of injury or machine damage.
• Careless sawing or splitting may cause unexpected hazards.
• Ensure that the PTO shaft is undamaged and attach the shaft guard chain to the machine.
• Avoid unnecessary lifting by using a suitable log rack.
• Do not lift logs directly onto the in-feed conveyor with a loader.
DO NOT LEAVE A RUNNING MACHINE UNSUPERVISED!
To Next Page
Loading...