Silver Crest SWR 300 A1 User Manual

Specifies the device's purpose and limitations for private use.

Lists the components included with the wireless repeater.

Provides detailed specifications for the wireless repeater.

General guidelines for safe operation and handling of the device.

Outlines essential safety precautions for using the wireless repeater.

Provides guidance on handling and securing the device's cables.

Advises on safe usage by children and individuals with disabilities.

Discusses radio wave interactions and potential interference with other devices.

Instructions for storing the device when it is not in use.

Identifies and explains the different parts of the wireless repeater.

Guides on plugging in and the initial setup process for the repeater.

Step-by-step guide to setting up the repeater using the WPS function.

Instructions for configuring the repeater via a wired LAN connection.

Details how to access the repeater's web-based configuration interface.

Procedure for changing the language of the configuration menu.

Steps to set up the device in Wireless Access Point (WAP) mode.

Explains how to save the configuration settings for WAP mode.

Explains the function of each LED indicator on the device.

Detailed guide to setting up the repeater to extend wireless network range.

Recommends using the wizard for initial setup and configuration.

Instructions for saving the configuration for Wireless Repeater mode.

Procedure for safely exiting the device's configuration menu.

Introduction to advanced configuration options for experienced users.

Displays the current status of LAN, wireless network, and Repeater AP.

Configures IP address, subnet mask, gateway, and DHCP settings.

Configures essential wireless network parameters like SSID and mode.

Sets up encryption and security protocols for the wireless network.

Controls network access based on MAC addresses for enhanced security.

Adjusts advanced wireless parameters for performance optimization.

Enables connecting multiple access points using WDS for broader coverage.

Configures WPS settings through the menu interface.

Manages access to the web server and changes configuration language.

Resets the wireless repeater to its original factory default condition.

Procedure for upgrading the device's firmware to the latest version.

Backs up or restores the device's current configuration settings.

Instructions for rebooting the wireless repeater with or without saving settings.

Displays detailed system information including CPU and memory usage.

Provides information on LAN settings and packet transmission status.

Shows details of wireless network connections and signal status.

Provides solutions for common problems encountered with the repeater.

Instructions for cleaning and maintaining the wireless repeater.

Information on responsible disposal of the device and packaging.

States compliance with relevant European directives and standards.

Details warranty terms, service contacts, and manufacturer information.