6
2.8 Slide bumper bar down onto
connection points on chassis, until it
clicks into position. Pull upward on
each side of bumper bar to ensure it
is securely attached.
Your Avia pushchair is now ready for
use.
2.9 To remove bumper bar, locate red
locking tab on either side of bumper
bar. Pull both tabs towards you and
keep pulled, whilst lifting bumper bar
upwards.
2.10 For easy removal and placement of
your child, the bumper bar can be
opened without removing from the
pushchair. Simply release locking tab
on one side only.
2.8
Assembling the Avia
2.10
2.9
To Next Page
