Using the liner and mattress
4.1 Ensure the hood is in the up position.
4.2 Secure the press studs which are half
way up the liner to the press studs that
are near the wing nut on both sides.
4.3 Secure the press studs that are attached
to the elastic on the liner to the press
studs that are built into the pram body
on top of the back ledge.
4.4 The mattress can be used with or
without the liner. If using the mattress
with the liner ensure the liner is in place
first.
4.5 Before inserting mattress ensure back
support is folded flat as shown in 6.4.
Insert mattress on top of back support.
Note: Ensure the head rest part of the
mattress is nearest the hood. For advice
on cleaning see the wash care label.
WARNING: Only use the mattress
provided by Silver Cross.
4.2
4.3
To Next Page
Loading...
