2.2
2.1
The hood and apron
CAUTION: The child should be clear of
moving parts while making adjustments.
2.1 Lift hood into position and push down
on the levers on both sides of the hood
to secure in place.
2.2 Fit the apron around the contour of the
pram body and fasten the press studs
on either side of the pram. To hold
the storm flap in place, loop the metal
fastener over the nut on either side of
the hood.
Note: The apron can still be used in
conjunction with the liner.
Using the brake
3.1 To operate the brake, push down on the
lever with the black handle behind the
back right hand wheel.
3.2 To release the brake, lift the lever back
up.
Note: Always apply the brake when the
pram is stationary.
3.1
To Next Page
Loading...
