3
silvercrossbaby.com
Preparation for use
Remove all packaging material from
your Chassis.
2.1a Attach the wheels by first removing
any axle packing protection. Present
the wheels to the axle and slide into
position.
IMPORTANT: If you have a Classic
Chassis go to point 2.2. If you have an
Elegance Chassis please read 2.1b
2.1b Please ensure that the rear wheels are
fitted to the rear axles. The rear wheels
have a toothed sprocket that allows the
brake to be applied.
2.2 Release the wheel locking clip by pulling
gently and slide the wheel to the stop
position. Release the clip and check that
the wheel has firmly attached. Repeat on
all four wheels.
2.1a
2.1b Elegance Chassis only
2.2
REAR WHEELFRONT WHEEL
To Next Page
Loading...
