Using your Freeway as a Pram
5.1 Recline the seat to the lie flat position by
releasing the mechanism at the back of
the seat (see 6.1-6.2)
5.2 Ensure the footrest is out and the calf
rest is horizontal (see 7.1)
5.3 With the hood detached, place the liner
in the seat unit with the toe end of the
liner fitting around the bumper bar and
calf rest.
5.4 Attach the hood (see 9). Slide the apron
over the toe end of the liner and attach
to the side arms with the press studs.
Your Freeway pram is now ready for use.
Adjusting the seat position
6.1 The Freeway body has four seat
positions, from lie flat to upright.
6.2 To adjust the seat, place the palm of
your hand on the hand rest at the back
of the body. Grip and release the catch,
then either lift or lower to the desired
position.
5.3
6.1
6.2
To Next Page
Loading...
