Attaching the Simplicity Car Seat
7.1 To attach your Simplicity car seat to the
Linear chassis, hold the car seat centrally
over the chassis mounting bars. On the
underneath of the Simplicity are four
locking points, lower the car seat onto
the Linear mounting bars so that these
locate and ‘click’. Gently lift the car seat
to ensure it is fully locked on to the
chassis.
7. 2 To disengage the Simplicity, there is a
release handle on the rear of the car
seat, pull this upwards whilst holding the
car seat by the handle. You can now lift
the Simplicity off the chassis.
7.1
7. 2
To Next Page
Loading...
Need help?
General
