Silver Cross REFLEX - Assembling the Reflex

4
Assembling the Reex
2.1 Attach the swivel wheels by locating
the wheel under the steel attachment
pin. Slide the wheel upwards and
press until the wheel clicks into
position.
WARNING: CHECK
THE WHEEL IS SECURE
BY PULLING GENTLY
DOWNWARDS.
Repeat on both sides. Your Reex is
now ready to be unfolded.
2.2 Locate the locking catch on each side
of the pushchair and lift to release
from the locking stud.
2.3 Allow the pushchair to open by lifting
the handles upwards and the wheels
will naturally fall to the oor.
2.1
2.3
2.2