5
silvercrossbaby.com
Assembling the Reex
(continued)
2.4 Finally, press down gently upon
the rear locking catch, positioned
between the rear wheels, to lock your
pushchair.
WARNING: FAILURE TO DO
THIS WILL CAUSE DAMAGE
TO YOUR PUSHCHAIR.
Place the pushchair on a at surface
and ensure that the pushchair moves
freely.
2.5 To t your Reex hood, locate the
clips on the hood. Now attach the
hood to the Reex chassis by sliding
clips over the hood connection
bracket. A positive engagement
should be ensured.
2.6 Connect the fabric of the hood
to the fabric of the seat with two
press studs, one on each side of the
pushchair.
2.7 Connect the fabric of the hood to
the rear leg of the chassis with two
press studs, one on each side of the
pushchair.
2.4
2.5
2.6
2.7
To Next Page
Loading...
