6
Assembling the Reex
(continued)
2.8 Your Reex hood can be opened and
folded by pulling the hood forward
or pushing backwards on the hood
frame. Your hood can also be
extended forwards by unzipping zip
as shown in diagram 2.8. Please note
when folding your Reex pushchair
you should always ensure the hood
is folded away. Failure to do this
could result in damage to your Reex
pushchair.
2.9 Your Reex pushchair has a multi-
position calf support. Locate the
adjustment levers either side of the
calf support. Pull levers towards you
and adjust to the required position.
2.8
2.9
To Next Page
Loading...
