SE355 1 10/19/06
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
WEAR HEARING
PROTECTION
AVOID
PROLONGED
EXPOSURE TO
VIBRATION
• MAXIMUM RPM OF 18,000
• MAX AIR PRESSURE: 90
PSIG, 6.2 BAR
• RPM OF THE ACCESSORY
MUST EXCEED TOOL RPM
Some dust created by power sanding, sawing, grinding, drilling, and other construction
activities contains chemicals known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and other masonry products, and
• Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
SPECIFICATIONS
Operating Instructions Warning Information Parts Breakdown
Copyright © Professional Tool Products, 2006
All rights reserved.
SE355
Mini Right Angle Air Die Grinder
Free Speed . . . . . . . . . . . . . . . . . . . . . .18,000 RPM
Net Weight . . . . . . . . . . . . . . . . . . . . . . . . .1.25Lbs.
Overall Length . . . . . . . . . . . . . . . . . . . . . . . 4-7/8"
Air Consumption . . . . . . . . . . . . . . . . . . . . . 4 CFM
Air Inlet Size . . . . . . . . . . . . . . . . . . . . . . . . . .1/4"
Collet Size . . . . . . . . . . . . . . . . . . . . . . . . . . . .1/4"
Minimum Hose Size. . . . . . . . . . . . . . . . . . . . .3/8"
Recommended Air Pressure . . . . . . . . . . . . 90 PSI
To Next Page
Need help?
General