2
Open box to check
Installation
¾
¾
¾
¾
¾
¾
¾
¾
¾
This product use new hi
h temperature-resistance pro
ect plastic to
make. It has a beautiful surface to show the characteristic of new sta
e
li
hts. You could choose the color
ou like. It is made accord CE
standard. It accord with the international DMX512 a
reement. Sin
le or
several can be used at same time. It could be used in different place.
The product use semiconductor laser movin
mirror scan to make man
kinds of
obos and the size of
obos ad
ustable. Li
ht touch control
switch and code displa
make operation easier. When
ou receive the
product, take it gently check if there is problem which cause in
transportation. At the same time please pa
attention to see if there are
some parts enclosed:
1 Power line
1 Fuse line
1 User manual
Please confirm whether the volta
e
ou have is same as si
ned on the
light before install.
Installed by technician. It muse be placed safety and best light angle.
Must keep space between li
ht equipments and combustibles more than
half a meter. Keep space between li
ht equipments and wall more than
0.15 meter.
The fans and vent-pipes should not be
ammed b
other equipment and
decorate materials.
There have a fuse line connection hole at the bottom of li
ht. Please use
a fuse line that could stand 10 double of li
ht's wei
ht to drill throu
h
fuse line connection hole to help install in safety view.
The light must be fixture installed.
In safety view please put ground wire into the ground.
Laser Motorhead Li
ht .1.
To Next Page
Loading...