EasyManua.ls Logo

Silvercrest 284999 - User Manual

Silvercrest 284999
135 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
IAN 284999
STAINLESS STEEL MICROWAVE SMW 900 EDS B5
STAINLESS STEEL MICROWAVE
Operating instructions
ΦΟΥΡΝΟΣ ΜΙΚΡΟΚΥΜΑΤΩΝ
Οδηүίες χρήσης
EDELSTAHL-MIKROWELLE
Bedienungsanleitung

Table of Contents

Questions and Answers

  • B
    Brooke CarrAug 11, 2025
    What to do if Silvercrest 284999 displays E02 and beeps?
    • P
      Patricia ElliottAug 11, 2025
      If your Silvercrest Microwave Oven displays 'E02' and beeps, it indicates a sensor error or an error during the appliance's heating up. Stop the program, let the appliance cool down, and then restart the microwave. If the error persists, contact Customer Support.
  • D
    Dr. Laurie Stewart MDAug 17, 2025
    What to do if my Silvercrest 284999 Microwave Oven turntable makes a loud noise?
    • M
      Mary CookAug 17, 2025
      If the turntable in your Silvercrest Microwave Oven is making a loud noise when turning, it could be due to a couple of reasons: * The turntable might not be correctly positioned on the axle. Ensure it is properly inserted into the cooking area. * The small rollers or the floor of the cooking area might be unclean. Clean the rollers and the floor of the cooking area.
  • M
    Mr. Dan Wilson MDAug 22, 2025
    What to do if Silvercrest 284999 Microwave Oven displays E03 and beeps?
    • C
      Collin StephensAug 23, 2025
      If your Silvercrest Microwave Oven displays 'E03' and beeps, it means the microwave has switched into fault protection because of a short circuit or open-circuit voltage. Stop the program and remove the power plug. If possible, eliminate the cause of the problem, for example, remove any metals from the cooking area that might be causing issues when using the microwave function. Otherwise, contact Customer Support.
  • J
    Joseph MckinneyAug 28, 2025
    What to do if Silvercrest 284999 Microwave Oven displays E01 and beeps?
    • J
      Joseph WilliamsAug 28, 2025
      If your Silvercrest Microwave Oven displays 'E01' and beeps, it indicates that the microwave has overheated. Immediately terminate the current program, remove the plug from the mains power socket, open the microwave door, and allow the appliance to cool down.
  • J
    Julie SantiagoSep 3, 2025
    Why is there nothing on the display of my Silvercrest 284999?
    • B
      Bethany RamosSep 3, 2025
      If there is nothing on the display of your Silvercrest Microwave Oven, it could be due to a few reasons: * The plug is not inserted into a mains power socket. Check that the plug is properly inserted. * The mains power socket is defective. Try another mains power socket.

Silvercrest 284999 Specifications

General IconGeneral
TypeMicrowave Oven
Power700 W
Capacity17 L
Number of power levels5
Turntable diameter24.5 cm
ColorWhite
Model284999
Weight10.5 kg

Related product manuals