SABD 3.7 LI D4■ 4
│
GB
│
IE
│
NI
│
CY
WARNING! RISK OF INJURY!
► This product contains rechargeable batteries. Do not throw the
batteries into a fire and do not subject them to high temperatures.
There is a risk of explosion!
► Do not use the appliance as a toy.
► Never leave children unsupervised in the vicinity of the appliance!
ATTENTION! PROPERTY DAMAGE!
► Only charge the appliance with the mains adapter/charger supplied
(Type SUK006A-053055)!
► The batteries in this appliance cannot be replaced.Only this cordless
sweeper may be charged with the supplied
battery charger; the charger is not suitable for other batteries.
► Never attempt to recharge non-rechargeable batteries.
Before first use
■ Remove the packaging material from the
appliance including the plastic cap 8, which
safeguards the on/off switch 6 from
unintentional pressure during transport.
Assembly of the cordless sweeper
■ Attach the handle 2:
– Fit the 3 handle elements
2 together by
pushing the push-in connection into the
handle 2. Press the knob 4 on the push-in
connection inwards and push it into the
handle 2 so that the head 4 engages in
the recess on the handle 5. The handle
elements 2 are now firmly fixed together
(see Figure B on the foldout page).
– Push the assembled handle
2 with the
push-in connection into the holder 3 on the
appliance and rotate the handle 2 until it
engages.
■ Fitting the dirt container
0 on the appliance:
– Push the dirt container
0 into the appliance
with a slight tilting movement. Ensure that the
dirt container
0 engages in the push-in
connection
q.