Silvercrest 385281 2107 - First Use

GB
│
IE
│
NI
│
7 ■
SSSES 1.5 B2
+
−
AAA
+
−
AAA
+
−
AAA
+
−
AAA
Fig. 3 Fig. 4
7. Replace the battery compartment latch e. Turn the battery
compartment latch e clockwise towards the lock sym-
bol until the two symbols are aligned and the battery
compartment latch e audibly clicks into place (see fig.2).
8. Place the main appliance
7 back onto the soap tank8.
Then turn the soap tank 8 clockwise until it is sitting tight
and secure on the main appliance 7. The appliance is
now ready for use.
First use
1. Place the appliance on a level and stable surface.
2. Rotate the soap tank 8 anticlockwise to remove it from the
main appliance 7.
3. Turn the soap tank latch
9 anticlockwise to remove it from
the soap tank 8.
4. Fill the soap tank
8 with liquid soap:
– up to the marking 1:3 w to provide a mixture level of
1 to 3 (one part soap to three parts water).
or
– up to the marking 1:2
q to provide a mixture level of
1 to 2 (one part soap to two parts water).
5. Fill up with water up to the marking max
0 in the soap
tank 8.
IB_385281_SSSES1.5B2_LB6.indb 7 05.10.2021 15:19:07