GB
│
IE
│
9 ■
SAS 7.4 LI E4
Information about the batteries
■ This handheld vacuum cleaner is powered by rechargeable lithium-ion batteries.
Before using the handheld vacuum cleaner for the first time, the batteries must
be charged for around 6 hours.
■ For care of the batteries, we recommend the following:
Once the batteries have been charged, disconnect the mains adapter
4 from
the mains socket. Do not connect the handheld vacuum cleaner to the mains
socket again until the suction power has become noticeably weaker and the
charge indicator lamp 7 is flashing green.
Note
► The appliance is equipped with a temperature monitor to protect the batter-
ies. At high ambient temperatures (in rare cases) the charging process may
be interrupted or the appliance may switch off automatically:
– The charge indicator lamp 7 lights up red during charging. The
charging process is interrupted and resumes automatically as soon as the
temperature of the appliance has dropped.
– The charge indicator lamp
7 flashes red three times at one second inter-
vals during operation. The appliance switches off automatically. Allow the
appliance to cool for 20–30 minutes before switching it on again.
Installation of the wall bracket
DANGER!
► Ensure that there are no power cables or other conduits or pipes in the wall
at the location where you intend to bore the holes for the wall bracket 3.
Drilling into a current-carrying electric cable can be potentially fatal!
1) Place the barrel plug
5 of the mains adapter 4 into the wall bracket 3 as
shown in the diagram. Secure the barrel plug 5 by turning it (see fig. 1).
Fig. 1
To Next Page
Loading...
