EasyManua.ls Logo

Silvercrest Arcade Classic MX - Inserting the Batteries; Using Rechargeable Batteries

Silvercrest Arcade Classic MX
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB / 4 / 14
3 Introduction and Setting Up
Congratulations on your new Games Console. We hope you will have a lot
of fun with it. Please follow the instructions in this manual to make the best
possible use of the product.
3.1 Product Contents Check
The package comprises the following items:
Games console
Instruction manual
3.2 Power Supply
3.2.1 Inserting the batteries
Hold the unit gently with the
front in the palm of your hand,
and open the battery
compartment by pushing the locking tab and then sliding it
open; the cover can now be lifted up.
The ARCADE CLASSIC requires 3 1.5V 'AAA' or 'LR03' type
batteries.
IMPORTANT: At each battery change, please use a
pointed object to press down on the recessed ACL button
inside the compartment (underneath the left-hand battery):
this will help to eliminate any residual current inside the
unit.
When inserting the batteries, ensure correct polarity (+/-). The
terminals must match the symbols on the diagram inside the
compartment.
Close the battery compartment cover.
3.2.2 Using Rechargeable Batteries
We strongly advise you to use alkaline batteries. We do not recommend
rechargeable batteries, as these only have a voltage of 1.2 and therefore
supply insufficient power to the machine.