What to do if Silvercrest COCOON M1450 TWIN Cordless Telephone display remains dark?
If the display of your Silvercrest Cordless Telephone remains dark, there might be several reasons. First, check the position of the batteries. Second, ensure that the batteries are charged. Also, verify that the handset is switched on and that the unit is getting power correctly.
Why is the icon flashing on my Silvercrest COCOON M1450 TWIN Cordless Telephone?
The icon flashing on your Silvercrest Cordless Telephone indicates a few potential issues. It could be that the handset is out of range, so try moving it closer to the base unit. Alternatively, the base might not have a power supply, so check that. Finally, the handset may not be registered to the base; in this case, register the handset to the base unit.
What to do if my Silvercrest COCOON M1450 TWIN Cordless Telephone has no tone?
If your Silvercrest Cordless Telephone has no tone, the telephone cable might be incorrectly connected or faulty, so check its connection. Another handset might be using the line; if so, wait until the other handset hangs up.
What to do if Silvercrest COCOON M1450 TWIN does not react when a key is pressed?
If your Silvercrest Cordless Telephone does not react when a key is pressed, it might be a program error. Remove the batteries, wait 1 minute, and then reinsert them.
Why is my Silvercrest COCOON M1450 TWIN Cordless Telephone base unit or handset not ringing?
If your Silvercrest Cordless Telephone base unit or handset is not ringing, the ringer volume might be off or too low. Adjust the ringer volume.
What does "Incorrect PIN" mean on my Silvercrest Cordless Telephone?
If your Silvercrest Cordless Telephone displays "Incorrect PIN", it means an incorrect PIN has been entered. Check the PIN and try again.
How to fix no connection despite good tone quality on Silvercrest Cordless Telephone?
If you have no connection despite good tone quality on your Silvercrest Cordless Telephone, the dialling mode might be wrong. Check the dialling mode.
What does two warning beeps from the base unit of Silvercrest Cordless Telephone mean?
Two warning beeps from the base unit of your Silvercrest Cordless Telephone when plugged into the 230V mains indicates that the maximum number of handsets has already been registered, and no more handsets can be registered.
Why is it not possible to forward calls in a private exchange on my Silvercrest Cordless Telephone?
If it's not possible to forward calls in a private exchange on your Silvercrest Cordless Telephone, the flash time might be too short. Adjust the telephone to a long flash time.
General| Type | Cordless Telephone |
|---|---|
| Model | COCOON M1450 TWIN |
| Brand | Silvercrest |
| DECT | Yes |
| GAP compatible | Yes |
| Range outdoor | 300 m |
| Range indoor | 50 m |
| Caller ID | Yes |
| Handsets | 2 |
| Answering machine | Yes |
| Max. recording time | 15 min |
| Phonebook entries | 50 |
| Redial memory | 10 |
| Conference Call | Yes |
| Intercom | Yes |
| Frequency | 1.9 GHz |
To Next Page