Silvercrest DV-5000HD - The Video Light; Exposure Compensation

Recording DV-5000HD
26 - English
The Video Light
In dark environments you can enable the built-in video lamp [2] for video
or photo recording. To do this, press the
button on the four-way button
[6]. Pressing this button again will turn the video lamp off. While the video
lamp is enabled, the
icon will appear on the display.
Video lamp
Exposure Compensation
During video and photo recording you can set an exposure compensation
value. Press the
button on the four-way button to reduce the exposure
compensation or press the
button to increase it. The selected value will
be shown on the display (icon 2)..
+2.0 EV
+1.5 EV
+1.0 EV
+0.5 EV
Sensitive exposure setting.
Recommended for subjects in dark
environments.
±0 EV No exposure correction.
-0.5 EV
-1.0 EV
-1.5 EV
-2.0 EV
Less sensitive exposure setting.
Recommended for bright subjects or for
backlight photography.