Silvercrest DV-5000HD - Setting Date and Time

DV-5000HD Introduction
English - 121
Setting Date and Time
 Power the device on by pressing and holding the On/Off button [16]
for approx. 1 second.
 Press the mode selector button [12] twice to display the Setup menu.
 Press
or on the four-way button [6] to select Date / Time and
then press the shutter button [7].
 Press
or on the four-way button (6) to toggle between the year,
month, day, hours and minutes fields.
 Press the shutter button (7). The colour will change from yellow to red.
 Press
or on the four-way button [6] to choose a different value
for the current parameter. Then press the shutter button (7) again.
 Repeat these steps until you have finished setting the date and time.
 Navigate to the
icon and press the shutter button [7] to save the
settings and exit the menu.