Alarm function
The world receiver provides two alarms that can be set independently of
one another, AL1 and AL2. For both, you can set:
...whether the alarm should operate on every day of the week or only
from Monday to Friday;
... whether you wish to be woken by the alarm tone or the radio.
Setting the alarm time
You can set two alarm times in your world receiver.
• With the radio switched off, press the buttons VOL.+/AL–1 (or VOL.-/AL–2).
The screen shows the most recently set alarm time and the symbol for
the alarm type.
• Press the
UP or DOWN button to move the alarm time forward or backward
at minute intervals. Hold down one of the buttons for a few seconds to
move the setting forward or backward quickly at 10 minute intervals.
• Press the
VOL.+/AL–1 (or VOL.–/AL–2) button until the desired alarm function
(see table above) is indicated on the screen.
- 18 -
Alarm function Symbol on the screen
Radio
Acoustic signals
Switched off No symbol
IB_KH2031_DT35253_LB4C 09.09.2009 12:56 Uhr Seite 18
To Next Page
Loading...
