SilverCrest SBTH 4.1 A1
20 -
Making calls
You can make calls with the headphones if you have connected the
headphones to a cell phone. You can use the following functions:
Function Action
Answer call Press the button (5) briefly
End call Press the button (5) briefly
Reject call Press the button (5) for about 2
seconds until you hear a beep
Redial Press the button (5) briefly twice
Increase volume
Press and hold the + button (4)
Decrease volume
Press and hold the - button (3)
Transfer a telephone call from
the headphones to the cell
phone
Press the button (5) for about 2
seconds until you hear a beep (while the
call is still active)
Take over a telephone call
from the cell phone to the
headphones
Press the button (5) for about 2
seconds until you hear a beep (while the
call is still active)
Accept a new call and end the
current call *
Press the button (5) once briefly.
Switch between two calls * Press the button (5) briefly twice
* This function must be supported by your network provider and be activated
in your smartphone.
To Next Page
Loading...
