Silvercrest LT 2310 - Connecting Component and S-Video Devices; Component and S-Video Cable Connections

14
Connecting the Devices
Connecting External Equipment with Components Outputs
Signal source: YPBPR
Use a triple-Cinch cable (not included) to connect this input to a high-end video source. Connect
the green, blue and red cables to the corresponding receptacles of your playback device and the
LT 2310. Please note that the audio signal must be transmitted to the separate Audio connector
(10). To do this you’ll need a Cinch audio cable (not included in the package).
Component video cable Cinch audio cable (red, white)
Connecting External Equipment with S-Video Output
Signal source: S-VIDEO or SCART2SV
To transmit video signals to other devices with S-Video output. Please note that the audio signal
must be transmitted to the separate Audio connector (16). To do this you’ll need a Cinch audio cable
(not included in the package).
S-Video cable Cinch audio cable (red, white)