EasyManua.ls Logo

Silvercrest SABD 3.7 LI D3 - Assembly of the Cordless Sweeper; Before First Use

Silvercrest SABD 3.7 LI D3
60 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SABD 3.7 LI D3
12 
GB
IE
WARNING! RISK OF INJURY!
This product contains rechargeable batteries. Do not throw the batteries
into a fire and do not subject them to high temperatures. There is a
risk of explosion!
Do not use the appliance as a toy.
Never leave children unsupervised in the vicinity of the appliance!
ATTENTION! PROPERTY DAMAGE!
Only charge the appliance with the mains adapter/charger supplied
(Type GPE003W-053050-2)!
Only this cordless sweeper may be charged with the supplied battery
charger; the charger is not suitable for other batteries.
Never attempt to recharge non-rechargeable batteries.
Before first use
Remove the packaging material from the appli-
ance including the plastic cap 8, which safe-
guards the on/off switch 6 from unintentional
pressure during transport.
Assembly of the cordless sweeper
Attach the handle 2:
Fit the 3 handle elements 2 together by
pushing the push-in connection into the
handle. Press the knob 4 on the push-in
connection inwards and push it into the
handle so that the head 4 engages in
the recess on the handle 5. The handle
elements are now firmly fixed together
(see Figure B on the foldout page).
Push the assembled handle 2 with the push-
in connection into the holder 3 on the appli-
ance and rotate the handle until it engages.
Fitting the dirt container 0 on the appliance:

Table of Contents

Other manuals for Silvercrest SABD 3.7 LI D3

Related product manuals