GB
│
IE
│
NI
│
9 ■SAD 12 C3
Electrical connection
IMPORTANT
► Before you connect the appliance to the power supply, check
to ensure that the required input voltage as given on the type
plate tallies with that for the intended power source. To avoid
possible damage to the appliance this data must match.
► Check to ensure that the cable for the power adapter
is not damaged and that it does not lead over hot surfaces
and or sharp edges, otherwise it could be damaged.
► Ensure that the cable for the power adapter
is not over-
taut or kinked.
♦ Connect the power adapter
to the appliance by inserting the
plug into the plug socket on the underside of the appliance.
Handling and operation
Initial use
IMPORTANT
► It is possible that oil drops may cause damage to furniture
surfaces. If necessary, place a cloth under the appliance.
♦ Place the appliance on a level and stable surface.
♦ Remove the lid
and fill the water tank , by using the
supplied measuring beaker, with max. 120 ml of clean
mains water. Pay heed to the maximum filling level .
♦ Add 3 to 5 drops of the desired oil to the water.
♦ Then replace the lid
onto the water tank . Ensure that the
steam outlet is not placed directly above the ventilation slot
otherwise no steam can escape.
♦ Insert the power adapter
into the mains power socket.
To Next Page
Loading...
