Silvercrest SAD 12 D3 - Electrical Connection; Handling and Operation; Initial Use

■ 64
│
GB
│
MT SAD 12 D3
Electrical connection
IMPORTANT
► Before you connect the appliance to the power supply, check
to ensure that the required input voltage as given on the type
plate tallies with that for the intended power source. To avoid
possible damage to the appliance this data must match.
► Check to ensure that the cable for the power adapter0
is not damaged and that it does not lead over hot surfaces
and or sharp edges, otherwise it could be damaged.
► Ensure that the cable for the power adapter0 is not over-
taut or kinked.
♦ Connect the power adapter0 to the appliance by inserting the
plug into the plug socket9 on the underside of the appliance.
Handling and operation
Initial use
IMPORTANT
► It is possible that oil drops may cause damage to furniture
surfaces. If necessary, place a cloth under the appliance.
♦ Place the appliance on a level and stable surface.
♦ Remove the lid1 and fill the water tank4, by using the
supplied measuring beakerq with max. 120 ml of clean mains
water. Pay heed to the maximum filling level8.
♦ Add 2 to 4 drops of the desired oil to the water.
♦ Then replace the lid1 onto the water tank4. Ensure that
the steam outlet2 is not placed directly above the ventilation
slot3 otherwise no steam can escape.
♦ Insert the power adapter0 into the mains power socket.
IB_340458_SAD12D3_LB5.indb 64 21.02.20 14:08