Silvercrest SAD 12 E4 - Handling and Operation; Initial Setup and Use; Controlling the Appliance

■ 12
│
GB
│
IE SAD 12 E4
Handling and operation
Initial use
IMPORTANT
► It is possible that oil drops may cause damage to furniture
surfaces. If necessary, place a cloth under the appliance.
♦ Place the appliance on a level and stable surface.
♦ Remove the diffusion cone 1 and fill the water tank 4, by
using the supplied measuring beaker w with max. 80 ml of
clean mains water. Pay heed to the maximum filling level 9.
♦ Add 2 to 4 drops of the desired oil to the water.
♦ Then replace the diffusion cone 1 onto the water tank 4.
♦ Insert the power adapter q into the mains power socket.
Switching the appliance on and off and the
colour change function
♦ Press the button6 to switch on the appliance. Aromatic
mist production and the colour change function start.
♦ Press the
button7 to fix the current colour.
♦ Press the button7 again to switch off the colour change
function.
♦ Press the button6 again to switch off the appliance.
Aromatic mist production and the colour change function stop.
NOTICE
► The appliance switches itself off automatically as soon as the
liquid in the water tank 4 has been used up.