Silvercrest SADH 12 C3 - Handling and Operation; Initial Use; Switching on;off and Timer Functions

■ 12
│
GB
│
IE
SADH 12 C3 / SADH 12 D3
Handling and operation
Initial use
IMPORTANT
► It is possible that oil drops may cause damage to furniture
surfaces. If necessary, place a cloth under the appliance.
♦ Place the appliance on a stable and level surface.
♦ Remove the coverw and lid1.
♦ Fill the water tank3 with at least 20ml (maximum 300ml)
clean tap water using the provided measuring beaker r. Note
the maximum filling level 6 marked with MAX.
♦ Add 2–4 drops of the desired oil to the water.
♦ Afterwards, place the lid1 and coverw back on the water
tank3.
♦ Connect the mains adaptere to the mains socket.
Switching the appliance on/off and setting
the colour change and timer functions
♦ Press the button 0 to switch on the appliance. Aromatic mist
production starts.
♦ Press the
button9 to start the colour change function.
Illumination of the buttons appears in the current colour.
♦ Press the
button9 again to set and maintain the current
colour. Pressing the button 9 repeatedly lets you choose
your favourite colour.
♦ Hold down the
button 9 for two seconds to switch off the
illumination.