Silvercrest SAS 7.4 LI B1 User Manual

GB
│
IE
│
NI
│
CY
│
9 ■
SAS 7.4 LI B1
Operation
cauTiON!
► The suction opening must always be open and may not be blocked. Block-
ages lead to overheating and damage to the motor.
NOTicEs
► Make certain that the dust filter 0 is always inserted before using the
appliance.
► When vacuuming liquid, do not exceed the MAX marking in dirt container q.
1) Remove the handheld vacuum cleaner from the wall bracket 3 or, if you are
not using the wall bracket 3 remove the barrel plug 5 from the socket.
2) If required, place the appropriate nozzle in the suction opening:
– the crevice nozzle 2, to clean narrow and difficult to reach locations.
– the wet suction nozzle 1 to vacuum up liquids.
NOTE
► After you have vacuumed up liquids, immediately clean the dirt container q.
Otherwise, bacteria or mould will build up inside! Ensure that the dust filter
bag 9 is completely dry before using the appliance again.
3) To switch the appliance on, slide the on/off switch 6 forwards. The charge
indicator lamp 7 lights up green.
4) When you have finished using the appliance, slide the on/off switch 6 to
the rear.
IB_290728_SAS7.4LiB1_IE_NI_CY.indb 9 07.09.17 13:02

Silvercrest SAS 7.4 LI B1 Specifications

General

Brand	Silvercrest
Model	SAS 7.4 LI B1
Category	Vacuum Cleaner
Language	English